US$

Cart

Loadding...
Home>Original VXDIAG>VXDIAG Multi Diag Serie>New Offer VXDIAG Multi Tool for Full Brands incl JLR HONDA GM VW FORD MAZDA TOYOTA Subaru VOLVO BMW BENZ with 2TB HDD X220 Laptop
New Offer VXDIAG Multi Tool for Full Brands incl JLR HONDA GM VW FORD MAZDA TOYOTA Subaru VOLVO BMW BENZ with 2TB HDD  X220 Laptop

New Offer VXDIAG Multi Tool for Full Brands incl JLR HONDA GM VW FORD MAZDA TOYOTA Subaru VOLVO BMW BENZ with 2TB HDD X220 Laptop

US$ 1199.00

Copy and share this link on social network or send it to your friends

Copy
Adding to cart succeed
New Offer VXDIAG Multi Tool for Full Brands incl JLR HONDA GM VW FORD MAZDA TOYOTA Subaru VOLVO BMW BENZ with 2TB HDD X220 Laptop
color:red,size:xxl
Subtotal: US$ 0
View My Cart

  • Product Description

    This is VXDIAG MULTI Diagnostic tool with full Software for all Car brands, including JLR HONDA GM VW FORD/MAZDA TOYOTA subaru VOLVO BMW BENZ.
    This package includes Second Hand Laptop Lenovo X220 and 2TB HDD, no need to install software, users can use directly when receive.

    VXDIAG Multi Tool for Full Brands incl JLR HONDA GM VW FORD MAZDA TOYOTA Subaru VOLVO BMW BENZ with 2TB HDD X220 Laptop

    Please attention : This set does not include JLR DOIP, PW3 License.
    This set needs about 3-4 days to finish installation before shipment. Please kindly note.
    The hard drive comes with BMW, BENZ, GM, Ford / Mazda, Toyota, Honda, VW ODIS, LandRover / Jaguar, Subaru, Volvo, VW Software.
    Note: Tech2WIN cannot support win7 64bit now. When run TECH2WIN, need to Choose device as MDI2 but not VXDIAG.
    Software version:
    BMW ISTA-D 4.32.15, ISTA-P 68.0.800
    BENZ 2022.6 XENTRY 31.8.2.0_V4, DTS 8.13.029
    VW 9.1.0, Engineering V14
    JLR SDD V160
    PW II V18.100.000
    VOLVO 2014D
    FORD IDS V125.01
    MAZDA IDS V125.01
    GM GDS2 V22.2.033 / 2021.4, tech2win 23.002,
    TOYOTA Techstream V16.20.023
    HONDA HDS V3.102.054
    SUBARU 2020.7, SSM3 V1.57.71.8, SSM4 V22.60
    Car BrandSupported YearSoftware Version
    For Benz2005-20222022.6 XENTRY 31.8.2.0_V4, DTS 8.13.029
    For BMW2004-2021ISTA-D 4.32.15, ISTA-P 68.0.800
    For P-orsche2005-2018PW II V18.100.000
    For V-W2001-2021O-DIS 9.1.0, Engineering V14
    For JLR2007-2016SDD V160
    For Ford2005-2021 (F series after 2010)IDS V125
    For Mazda2005-2021IDS V125
    For GM2001-2021Tech2win 23.002 2001-2010, No Opel or SAAB before 2010
    GDS2 V22.2.033 / 2021.4 2010-2021
    For Toyota2005-2021 (Old models with K-Line not Available)Techstream V16.20.023
    For Honda2005-2018HDS V3.102.054
    For Subaru2005-2021SSM3 V1.57.71.8, SSM4 V22.60, 2020.7
    For V-olvo2001-2014V-I-D-A 2014D


    ALLSCANNER VXDIAG Functions & Features
    1.VXDIAG for BMW function introduction (Support for the year: 2004.1-2019)
    The new BMW software can perform programming and coding for all BMW E / F / G series cars. Same as BMW ICOM A1 / A2 / A3, ALLSCANNER VXDIAG supports all BMW software and is good at fiber programming.
    The main diagnostic software includes:
    BMW ISTA-D (Diagnostic);
    BMW ISTA-P (Programming)
    BMW Group ISPI (the fourth generation of BMW diagnostic software client);
    E-SYS (Engineer Software for F series, available for programming, coding, Chinesization, realize hidden functions, advanced features);
    WINKFP (for E series: programming, upgrade and downgrade);
    Tool32 (enter key, import codes, delete certification, advanced features of BMW series);
    INPA (read vehicle information, diagnosis, read and clear trouble codes);
    BMW Coding (for E series: import data, change the code or realize hidden functions);
    KSD2 (offer full vehicle repairing information for diagnosis or programming);
    NCS-Expert tool (for E series: set codes, realize hidden functions and change settings);
    BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it can achieve professional features which all the original professional computers can realize, can change the language into Chinese through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.). Features mainly include: diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.
    BMW software version: Diagnosis: ISTA-D v4.18.20, Programming: ISTA-P v3.65.2.000
    Following functions can be activated based on the existing configuration model:
    01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)
    02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)
    03 support audio and video playback via USB cable as well as via iPod.
    04 connect to the phone through the Wi-Fi (mobile phones are required to install software)
    05 open the voice recognition function (currently only available in English digital telephone dialing)
    06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)
    07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)
    08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)
    09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)
    10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)
    11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)
    12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)
    13 automatically released the handbrake (parking button) when the vehicle is started (testing)
    14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)
    15 L7 around Sound Pro
    Personalized Customization
    1. Set Seat Belt Alarm time (second / sec)
    2. Disable passenger Seat Belt Alarm
    3. Disable driver Seat Belt Alarm
    4. Set the engine on / off status the same as that before the ignition off or the default status off.
    5. Set the central lock automatically unlock when ignition off
    6. Set Fuel Economy Mode as default mode after ignition on
    7. Enable roll up window when open car door
    8. Enable the option of DRL (Day Running Lights) on or off.
    9. Set Highlight auxiliary and intersection traffic light “Automatic”
    10. Enable to adjust DRL brightness (the default factory setting is brightest)
    11. Set fog light turn on while headlight is on
    12. Enable to Lock/Unlock sound and adjust the volume
    13. Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
    14. Set windshield wiper Back in place when ignition off
    15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
    16. Set the turn signal light on / off times (F30)
    17. Enable CIC menu display CI version
    18. Three Bluetooth phone rings available
    19. Enlarge phone number and text storage (25 to 50) A / C (Automatic Air Conditioning)
    20. Set indoor internal circulation memory the same as that when the ignition off last time.
    21. Set air conditioning memory the same as that when ignition off last time.
    22. Display engine output power and torque on navigation screen
    23. Cancel home screen boot delay confirm message
    24. Cancel rear view camera statement when reversing
    25. Display available gas station on navigation
    26. Display speed limit info (Need hardware support)
    27. Display engine torque menu
    28. Auto headlight
    29. TPMS
    30. Display tire pressure and temperature (Need hardware support)
    31. Adjust mile to kilometer
    33. GPS time synchronization
    34. Dashboard stimulate instant fuel consumption: change from 20 to 30
    35. Enable dashboard light on always
    36. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
    37. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
    38. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
    39. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
    40. DS Mode display current shift from S1 to S7
    41. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)
    42. PDC reversing radar is changed vertically and horizontally
    2.VXDIAG for BENZ function introduction (Support for the year: 2001.1-2019)
    Benz software include two versions of PASSTHRU & PDU,including DAS,Xentry software.Version of PDU support new car models of 222,213,205 etc,other car models need to usepassthru version to diagnose. Not support old models of 210,203,220 with K-Line communication. It support connections of WIFI,LAN and USB.
    Product Features:
    Engines (All Gasoline & Diesel Systems)
    Transmissions and Electronic Selector Modules
    Airmatic and Active Body Control Suspension Systems
    Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
    Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
    Drive Authorisation System
    Sam (Signal Acquisition) Modules
    Electronic Ignition System (EIS)
    Pneumatic System Equipment and ATA functions
    Air Conditioning / climate control Systems
    Instrument Cluster
    Tyre Pressure Control
    Parktronic System
    Keyless Go
    D2b Command & Audio Gateway (D2B and MOST networks)
    TV Tuner
    Headlamp Range Adjustment
    Seat Electronics
    Rvc, RST & Vario Roof modules
    Automatic Clutch System ACS
    M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
    Assyst & ASSYST + systems
    Ford / Mazda IDS Function: (Support for the year: 2005-2018)
    1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
    2. Live Data-stream with Recording & Playback Functions for Main ECUs
    3. Read & Clear Diagnostic Trouble Codes (DTCs)
    4. Set, Adjust or Remove Speed Governors
    5. Automatic vehicle recognition
    6. New Software Re-flash for Existing ECUs
    7. All Other Dealer Functions
    8. Steering Angle Resets
    9. Guided Fault Finding
    10. Program New Keys
    11. DPF Regeneration
    12. Brake Bleeding
    13. Injector Coding
    Honda HDS Function: (Support for the year: 2005-2018 )
    Functions Supported by Honda/Acura Protocols
    Reading and decoding fault codes from control blocks memory
    Deleting fault codes
    Displays system current parameters in digital form
    Combined displaying of data
    Management of executive devices
    Logs keeping - writing and keeping of digital parameters in memory
    Special functions - changing of permissible settings of blocks, programming etc.
    LAND ROVER JLR SDD Software Feature: (Support for the year: 2007-2016)
    USB Diagnostics tool for CAN and ISO9141 vehicles
    Supports reprogramming for Jaguar 2007 & up to 2016, Land Rover 2007 & up to 2016.
    J2534 and J2534-1 compliant device driver
    Simple packaging with electronics contained inside the cable.
    Commercial Range (0 to +70℃)
    Dimensions: 3" x 1.75"
    Operating Voltage: Bus-powered by USB
    Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver
    The newest JLR SDD can perform online programming, test, diagnosis and programming key with Incode, Chinese localization, etc.
    For the 2014 Range Rover Executive Edition and new Range Rover Sports, since the communication protocol was changed, only ALLSCANNER VXDIAG is verified to be able to diagnose. JLR Mangoose cable can’t cover any longer, if JLR Mangoose cable is plugged into the vehicle, all the dashboard warning lights will be on and lead to the vehicle malfunction; VCM can't cover neither, although it can cover the newer Jaguar and Land Rover.
    TOYOTA Functions and Descriptions: (Support for the year: 2005-2021)
    1.Fully compatible with SAE J2534
    2.Fully compatible with Toyota TIS Techstream
    3.Supports Diagnostics, and Active tests.
    4.Supports most 1996 and newer Toyota to 2019, Lexus, and Scion vehicles with OBDII / DLC3 diagnostics
    SUBARU SSM-III: (Support for the year: 2005-2018)
    1. Fully compatible with SAE-J2534
    2. Special dual cell processor for automotive, full compliant with all vehicles protocols.
    3. Self-determination design for adapters and cables
    4. SSM3 software version V2018.10, support vehicle from 2005 to 2018 year. SSM4 software version V22.60, support vehicle from 2016 onwards.
    5. Can program Subaru smart key
    6. Support Wifi
    SUBARU SSM3 Software Function:
    1. All System Diagnosis. Selecting this item displays on a single screen the fault detect status of all control system control modules for which SSMΙΙΙ diagnosis is supported, and memorized diagnostic codes.
    2. Each System Check. Selecting this item makes it possible to select a particular system from among the control systems forwhich SSMΙΙΙ diagnosis is supported, and perform fault diagnosis. This item can be used to view input/output data of the system control modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display. This menu item is also used after repair work is complete to delete diagnostic codes, to configure control module settings, etc.
    3. Saved Data Display. This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete.
    4. Immobilizer. This item performs immobilizer registration.
    5. Reprogram. This item performs reprogramming of the control module.
    6. Read CF application measurement data. This item performs reading stand alone measurement data saved in a CF card to hard disk of your PC.
    7. Convert/Save measurement data on driving recorder. Loads data sampled on the driving recorder to the PC from the CF card, and converts and saves that data.
    8. Oscilloscope. After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling. But we do not provide pulse/analog cartridge.
    VW features (Support for the year: 2008-2017)
    Support the newest ODIS software and UDS protocol.
    Support Volkswagen, Audi, Skoda
    SOFTWARE language available:
    English Japanese Portuguese Romanian Korean Dutch Polish Turkish Spanish French Italian Croatian Danish German Swedish Finnish Slovenian Czech Russian Greek Chinese
    GM/OPEL FEATURES: (Support for the year: 2001-2019)
    * Fully compatible with SAE-J2534-1 & SAE-J2534-2
    * All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
    * USB vehicle-to-PC connectivity
    * CE and FCC compliance for hardware
    * Supports Windows® XP
    * Firmware Updatable
    Global Diagnostic System (GDS & GDS2)
    * New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles.
    * GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
    GM Kit support both GDS & GDS2. GDS 2 works similar to the original GDS. easier and faster
    GDS 2 provides the following capabilities in multiple