2022 V9.5 Holland Electronic Service CNH Dpa5 Agriculture Diagnostic EST Engineering Level Truck Diagnostic Tools

What's new with EST 9.5.0.0 The release of the Electronic Service Tool (EST) 9.5.0.0 and new eTIM software includes several improvements to increase the ability of the user to service and diagnose equipment. These changes include: - EST PC OS and hardware requirements - EST Software Installation - Equipment Auto-Detection Support - EASy Software Management - EASy Injector Cutout Test Improvements Please see the Electronic Service Tool (EST) Version 9.5.0.0 Software guide in eTIM for more detailed descriptions and instructions for EST features. EST PC OS and hardware requirements All PC's running the EST and related software should at least meet the following minimum specifications:

Minimum Specifications: Processor: Intel Core i5 3rd gen Processor or higher RAM
Memory: 8 GB or greater
Operating System: Windows OS: Windows 10 64-bit Note: A 64-bit operating system is mandatory

Hard Drive: 250 GB or greater - Solid State Drive (SSD) is recommended for improved performance Display: SXGA (1280x1024 or higher resolution) 65535 Color or better (Active or Dual Scan)

NOTE: Be sure to verify that the display quality is acceptable in direct sunlight Pointing Device: Windows compatible mouse, touchpad device, or touch screen Ports:

One 9 pin Serial port (preferred) OR USB to RS-232 Converter - FTDI Chipset) 380003514 – USB to RS232 adapter

Two USB ports Ethernet port WiFi 802.11b / g Bluetooth Mobile Wireless - Recommended DVD / CD Drive: Multi Format Dual-Layer DVD/CD ROM Unit (external DVD drive is acceptable) NOTE: EST 9.3.0.0 will timeout on July 31st, 2021. With this, all support for Windows 7 and 8.x will be closed








Check status of parameters;

Provide ECU download crash recovery.

Support Brand
FOR New Holland (Agriculture and Construction)
FOR New Holland FK (Fiat-Kobelco)
FOR New Holland O&K (Orenstein & Koppel)
for CASE (Agriculture and Construction)
for STEYR
for KOBELCO
for Flexi-Coil
for Sumitomo (S.H.I.)

1* Latest FOR CNH Electronic Service Tool software 8.6/9.5  engineering level

(with USB for 1 PC activation andsupport online service by Teamviewer)

1* DearbornProtocol Adapter 5 diagnostic interface

1* K line cable

1* 15' USB cable

It is recommended to make a manual equipment selection if the EST cannot identify the connected equipment.



EASy Injector Cutout Test Improvements

EASy 16.1.0.0 update EDC17CV41_DA_CNH28427_1_4_6 includes a change to the injector cutout testing. The injector cutout test for the NEF and Cursor engines will now disable injectors based on physical cylinder location.


The EASy software previously disabled injectors based on the firing order of the engine.



Please refer to the machine specific engine service manual for cylinder location.