New VXDIAG VCX NANO PRO Diagnostic Tool with Free 7 Software For GM FORD MAZDA VW HONDA VOLVO TOYOTA JLR

VXDIAG VCX NANO PRO Functions:

1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)

2. Live Data-stream with Recording & Playback Functions for Main ECUs

3. Read & Clear Diagnostic Trouble Codes (DTCs)

4. Set, Adjust or Remove Speed Governors

5. Automatic vehicle recognition

6. New Software Re-flash for Existing ECUs

7. All Other Dealer Functions

8. Steering Angle Resets

9. Guided Fault Finding

10. Program New Keys

11. DPF Regeneration

12. Brake Bleeding

13. Injector Coding

VXDIAG VCX NANO PRO--GM

Version:2019.2

Support PC-based diagnostics with rollout of the Global Diagnostic System GDS & GDS2

Support GM TIS2WEB online Service Programming System (SPS) with your own G-M account.

Support Tech2Win application to offering a larger screen with all of the Tech 2 tool functionality

New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles.

GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.

You need have your own G-M account if you want to do online programming. Passthrough programming on G-M past model and Global A vehicles

Increase reprogramming speed 20-70% and get ready to service new models For pass-through programming of electronic control units on

all vehicles built since 1996 and future model releases. The VCX Nano KIT is between 20% and 70% faster than Tech 2.For example,

on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.

Tech2Win, an application version of the Tech 2 and CANdi (Control Area Network diagnostic interface) moduleTech2Win can

be used during a vehicle road test, offering a larger screen with all of the Tech 2 tool functionality.

The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, For Saab etc.

Support all models of Cherolet,Buick and Cadillac, multi-languages selection, support OEM softwares of for gm gds2 and tech2win, run gds2 on Vmware. Support online diagnostic and programming as OEM tool.

VXDIAG VCX NANO PRO--FORD&MAZDA

Ford Version:V114

Mazda Version:V114

Can diagnose cars till 2018.

Record and play back live data for ABS, PCM…tested ok

Program and Install new ECUs (PCM, ABS)…tested ok

Read and Clear DTCs…tested ok

Program New Keys for Mazda 6…tested ok

Set, adjust or remove speed governors…tested ok

DPF Regeneration…tested ok

Automatic vehicle recognition…tested ok

All other dealer functions…tested ok

Reset steering angle…tested ok

Find guided fault…tested ok

Injector Coding…tested ok

VXDIAG VCX NANO PRO--VW

VW Version: V5.1.5

Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;

VCX is a standard Passthru programming tool, which can do online ECU programming;

1. Fully compatible with SAE J2534;

2. Especially for cars, and all vehicles protocols are compatible with dual Cell processors;

3. Design adapters and cables with self-determination;

4. Fits CE and FCC hardware;

5. Fireware can be updated;

1.K line (ISO9141-2)

2.High-speed CAN (ISO 11898-2)

3.Low-speed CAN (ISO 11898-3)

4.J1850 (SAE J1850)

5.UDS

6.PWM

VXDIAG VCX NANO PRO--Volvo

Software Version: 2014D

VXDIAG VCX NANO PRO--Toyota

Software Version: V14.00.018

Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;

VCX is a standard Passthru programming tool, which can do online ECU programming;

VXDIAG VCX NANO PRO--LAND ROVER &JAGUAR

JLR Version:V153

VXDIAG VCX NANO PRO--Honda

Honda Version:HDS 3.102.054